2 resultados para 110320 Radiology and Organ Imaging

em QSpace: Queen's University - Canada


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Electron beam lithography (EBL) and focused ion beam (FIB) methods were developed in house to fabricate nanocrystalline nickel micro/nanopillars so to compare the effect of fabrication on plastic yielding. EBL was used to fabricate 3 μm and 5 μm thick poly-methyl methacrylate patterned substrates in which nickel pillars were grown by electroplating with height to diameter aspect ratios from 2:1 to 5:1. FIB milling was used to reduce larger grown pillars to sizes similar to EBL grown pillars. X-ray diffraction, electron back-scatter diffraction, scanning electron microscopy, and FIB imaging were used to characterize the nickel pillars. The measured grain size of the pillars was 91±23 nm, with strong <110> and weaker <111> and <110> crystallographic texture in the growth. Load-controlled compression tests were conducted using a MicroMaterials nano-indenter equipped with a 10 μm flat punch at constant rates from 0.0015 to 0.03 mN/s on EBL grown pillars, and 0.0015 and 0.015 mN/s on FIB-milled pillars. The measured Young’s modulus ranged from 55 to 350 GPa for all pillars, agreeing with values in the literature. EBL grown pillars exhibited stochastic strain-bursts at slow loading rates, attributed to local micro yield events, followed by work hardening. Sharp yield points were also observed and attributed to the gold seed layer de-bonding between the nickel pillar and substrate due to the shear stress associated with end effects that arise from the substrate constraint. The onset of yield ranged from 108 to 1800 MPa, which is greater than bulk nickel, but within values given in the literature. FIB-milled pillars demonstrated stochastic yield behaviour at all loading rates tested, yielding between 320 and 625 MPa. Deformation was apparent at FIB-milled pillar tops, where the smallest cross-sectional area was measured, but still exhibited superior yield strength to bulk nickel. The gallium damage at the outer surface of the pillars likely aids in dislocation nucleation and plasticity, leading to lower yield strengths than for the EBL pillars. Thermal drift, substrate effects, and noise due to vibrations within the indenter system contributed to variance and inconsistency in the data.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The human ether-a-go-go-related gene (hERG) encodes the pore-forming subunit of the rapidly activating delayed rectifier potassium channel (IKr) that is important for cardiac repolarization. Previously, we have discovered that hERG channels rapidly internalize in low extracellular K+ ([K+]o). In cell culture, this process is driven by the endocytic protein, caveolin-1 (Cav1), which is an integral player in the caveolae-dependant endocytosis pathway. However, in the heart, Caveolin-3 (Cav3) is, in fact, the predominant form in the myocyte, and thus may play a direct role in regulating hERG expression in the heart. Thus, I hypothesize that this reduction of hERG conductance in cardiac myocytes derives from the presence of Cav3, which is integral regulator of hERG homeostasis innately in the heart. To investigate the effect of Cav3 on hERG, I overexpressed Cav3 in human embryonic kidney 293 (HEK-293) cells stably expressing hERG channels. Cav3 overexpression significantly and specifically decreased both the hERG current amplitude and the mature channel expression in normal culture conditions. Co-immunoprecipitation analysis and confocal imaging demonstrated an association between hERG and Cav3 in HEK cells as well as rat and rabbit cardiomyocytes. Mechanistically, I discovered that Cav3 possesses a faster turnover rate compared to Cav1, and can enhance hERG degradation through up-regulating mature channel ubiquitination via the ubiquitin ligase, NEDD4-2. Knockdown of Cav3 in neonatal cardiac myocytes also enhanced hERG expression. My data indicate that Cav3 participates in hERG trafficking, and is an important regulator of hERG channel homeostasis in cardiac myocytes. This information provides a platform for future intervention of the hERG-induced type-2 long QT syndrome (LQTS).